Posted on Leave a comment

How to Make a Magic Spore Syringe

If you are searching for tips and guidelines on how to make a magic spore syringe, then you will find this article very useful. First of all, magic spore syringes are used to inoculate substrate. It is a grow medium that contains any kind of mushroom species of your choice. In order to start the cultivating process of magic mushroom, you need to have a magic spore syringe. One spore syringe can contain millions of magic mushroom spores. For those who wanted to cultivate magic mushrooms, learning how to make magic spore syringe is necessary.

There is no doubt about it that a magic spore syringe is the most important step in cultivating your very own shrooms or magic mushrooms. The good news is, making your own magic spore syringe is no rocket science. It is very easy to make magic spore syringe and there’s no need for you to buy special equipment in order to make one. However, although these kinds of syringe are very easy to make, it is still necessary that you take the time to consider some few things first. You need to follow certain pointers or guidelines to make sure that everything is perfect.

Two of the things that you need to consider when making magic spore syringe is the purity and effectiveness of the spores. That is why you are advised to do a little research on the Internet first before you proceed in making spore syringes. There are a lot of individuals out there who failed to cultivate magic mushrooms because they were not able to create an excellent spore syringe. Again, your aim is to ensure the purity and the effectiveness of the spores. You also need to understand the importance of sterile water. Remember that these magic spores are alive and it is vital that you keep them hydrated. If you want to increase the chances of cultivating magic mushrooms through magic spore syringes, then make sure that you keep the spores hydrated for about 24 hours.

Remember that a clean workspace is not enough when making magic spore syringes, but you need to make sure that it is sterile. Bear in mind that a small contamination can make things problematic. You will not be able to cultivate magic mushrooms if there is any contamination. Protecting the magic spores from molds, dust, and or bacteria. This causes a domino effect and you will no longer be able to cultivate shrooms. Making magic spore syringe requires you to be very patient. Once again, it is necessary that you follow certain guidelines and make sure that you know how to handle the spores. You don’t want to waste your time, money, and effort just because you failed to follow the proper guidelines.

Things You Need

  1.    Sterilized scalpel
  2.    Sterilized tweezers
  3.    Sterile syringe with needle
  4.    Sterile latex gloves and face mask
  5.    Small flask or bottle (make sure that the opening is small or narrow)
  6.    Spore Print
  7.    Sterile Water
  8.    Tinfoil to cover the container
  9.    Pressure cooker

Steps in Making Magic Spore Syringe

  1. The first thing that you need to do is to sterilize your water. Using your pressure cooker, make sure that you heat up the water. Heat and pressure should effectively kill or destroy all microbes.
  2. The next thing that you need to do is to sterilize the bottle or flask. When choosing a bottle or a flask, it is critical that you choose those that have small openings since this reduces the chances of microbes getting inside it. You can pour about 50ml of water into the bottle and then use tin foil to cover the opening. You will then place the bottle into your pressure cooker.
  3. When using a pressure cooker, make sure that the lids are properly closed and let it heat up for 15 PSI pressure. Keep the heat and pressure for about 30 minutes. After this, let it cool for at least 6 hours. You can also let it cool for overnight. Don’t forget to sterilize all other equipment such as reused syringes, tweezers, and scalpel.
  4. Now that you already sterilized all the important things you need, the next thing that you need to do is to remove the tin foil from the bottle or the flask.
  5. Using a pair of tweezers, take the magic spore print from the storage and hold it over the opening of the flask or the bottle.
  6. Then you need to scrape some of the magic spores into the water, using the sterilized scalpel.
  7. It is advisable that you assemble the sterile syringes and make sure that the needle is secured.
  8. Make sure that you are able to fill up the sterilized syringes as fast as you can. Place the tip of the syringe in the water and make sure that you empty the syringe back into the bottle or the flask. Just repeat this process several times. Keep in mind to dip the tip of your syringe without the needle first. Pull the plunger to suck the sterilized water with spores. Then, seal it using the needle.
  9. Once the syringes are already filled with spore suspension, the next thing that you need to do is to store it at a room temperature. It is advisable that you store it for at least 24 hours. Keep in mind that it is crucial that you keep the spores hydrated.
  10. When storing your magic spore syringes, it is essential that you store them in the refrigerator. The best temperature should be 2 to 5 Centigrade. Temperature plays an important role in the life of the spores. The lifespan of these spores should be around 6 to 10 months. Remember that the longer you keep the magic spores, the less potent they become.
  11. Do not forget that it is also very important that you label your magic spore syringes. Get an airtight bag or a Ziploc and place the syringe.

You may check out these amazing dried shrooms and other premium maushroom products only at ShroomsDirect!

Posted on Leave a comment

How To Get a Magic Mushroom Spore Syringe

How To Get a Magic Mushroom Spore Syringe

The psychedelic effects of magic mushroom make it very appealing to many people and have earned it quite a following in the world of recreational drugs. The commended psychoactive properties of the mushroom coupled with the fact that it is natural and not laboratory manufactured, unlike most substances, gave it even more allure in the eyes of many people.

You might have heard of mushroom cultivation as a rising trend among avid fans and users of magic mushrooms. There are plenty advantages to be had from growing them on your own, and perhaps, the best of these advantages is being sure that you have a steady supply of shrooms for your own consumption because although these fungi grow all year round, they are not always readily available.

Contrary to what many people believe, growing magic mushrooms is not that complicated; you may even find it to be a worthy and pretty rewarding feat. There are techniques that you can understand and follow without so much difficulty; one of them is the PK-Tek.

The PK-Tek is a very comprehensible method of growing mushrooms indoors that encourages the growth of magic mushrooms by mimicking the environment and conditions that are essential for their development. In order to replicate these settings, you need to create a substrate and get your hands on a spore syringe. To make the substrate, all you need are vermiculite, brown rice flour, and water. But where can you get the spore syringe?

Purchase Online or From Local Suppliers

A spore syringe is basically a syringe that contains spores suspended in sterile water. These spores are injected into a substrate to facilitate mushroom growth.

Spore syringes can be purchased online. The Internet proves to be an accessible and convenient market for people who are looking for spores of the various species to nurture and cultivate. However, if local shroom dealers and suppliers are available, it is better to order from them rather than from web markets to eliminate the need for shipping. This is due to the fact that dried shrooms and other forms of magic mushrooms are still considered illegal in most countries, including the U.S and Canada.

Make Your Own

For those who are already into mushroom cultivation or those who have acquaintances involved in growing magic mushrooms, making a spore syringe is another option. The process is not very complicated. Just remember to work under very sterile conditions to avoid contamination of any form.

The first thing needed to make a spore syringe is a spore print, which should be relatively simple.

First, take a mushroom and sever the mushroom cap from the stem by cutting it. Put the cap on a piece of paper or aluminum foil with the gills facing downwards. Pour a drop of water on the top part of the cap to aid in the release of the spores and cover the cap with a bowl or a glass. Leave it that way for 2 to 24 hours. The spores will fall on the paper or foil, resulting in a spore print pattern.

When a spore print is already available, the process of making the spore syringe can begin.

  1. Before anything else, make sure that the water and the glass flask are sterilized. When that’s done, fill the flask halfway with water and seal the opening with tin foil so air can’t get in.
  2. Take a pressure cooker and put the flask inside. Heat until the pressure reaches 15psi and then lower the heat. Keep it there for about 30 minutes.
  3. After 30 minutes, turn off the heat and let the flask and the water cool down to room temperature. This should take a few hours but the wait is necessary because going through the process while the water is still hot might kill the spores.
  4. Prepare and sterilize all your materials.
  5. Take the foil cover off the flask and with the tweezers, put the spore print directly above the opening of the flask.
  6. Use a scalpel to scrape a portion of the spore prints into the water.
  7. Place the tip of the syringe on the surface of the water and fill it up. Empty the syringe contents back into the water and fill it up again. This will help ensure that the spores are distributed throughout the water. Repeat this process when you add more spores into the water.
  8. Fill a syringe and leave it for 3 days at room temperature, allowing the spores to hydrate.
  9. After 3 days, store the syringe in an airtight vacuum bag or inside the fridge. The spore syringes can be used for a span of 2 – 6 months.

These steps on making your own spore syringe and the materials needed are very affordable and accessible. With the right substrate, the right conditions, and a lot of patience, you can start the feat of growing magic mushrooms within the comfort and convenience of your home.

Posted on Leave a comment

Common Problems in Growing Magic Mushrooms

Growing magic mushrooms takes special skills and the eye for some of the most common problems. Here are some of the top growing problems that even experts find difficult to handle.

Problems with the spore syringe

One of the most common problems encountered during the early stages of growing shrooms is using a spore syringe. A spore syringe is the spore container that growers use to sow the spores to the substrate. The most common problems users have are contamination, misidentified strains, and suppliers that sell syringes containing only water!

The only way to avoid this problem is to rely only on a reputable supplier. You will be able to find a good supplier when you check out recommendations from fellow magic mushroom growers, from reliable online sources and from people who have grown a particular type of magic mushroom you want to cultivate.

Once you have successfully grown your first batch of magic mushrooms, start filling your own syringes and keep these so you won’t have to buy any more.

Contamination of the mushroom crops (bacteria and mold contamination)

Crop contamination problems can be due to bacteria contamination or mold contamination. When your crops have been completely run over by bacteria or mold, your mushrooms will be rendered useless. If you don’t act fast, a small speck of mold could turn into a web of disaster and will waste all your time and efforts. A few tips to maintain cleanliness inside your growing area.

  • Before you even start growing your shrooms, clean your growing area completely. Use surface disinfectant, rubbing alcohol and sanitizers to clean surfaces and equipment that y you use to come in contact with your shrooms.
  • Have a butane or propane torch lighter to use on your tools Torching or heating the tip of tweezers and other handy equipment is a quick but effective way to sterilize these. You must also have extra cans of butane or propane ready so you can refuel your torch lighter when needed.
  • You must use an air sanitizer to clean the air from humid and unpleasant smells. An air sanitizer is different from an air freshener because the later simply changes the scent of the room without removing any hazardous microorganisms. Shop for the best one online.
  • You must also keep a box or sterile gloves and surgical masks to prevent contamination using your hands. Some molds and bacteria are carried by touch and using this safety equipment can help control the spread of microorganisms.
  • Take extra precaution. Before you go inside your growing area, spray air sanitizer, disinfect your equipment and surfaces. Take a shower, brush your teeth and put on clean clothes.
  • Once you spot a positive bacterial or mold contamination in your crops, deal with it immediately. Remove the contaminated containers, culture discs and any other contaminated tools from the growing area. Clean and sanitize the area with surface disinfectant and sanitizing equipment before you start to grow a new culture.

Pest control problems

A number of pests can wreak havoc to your mushroom crop and the best way to prevent these is to be vigilant. One such persistent type of pest is the fungus gnat. This is a winged insect that is very attracted to mushrooms. It feeds on the mushroom body by tunneling and eating the tissues of the mushroom. It can take only a few hours for an infestation to happen and soon all your hard work will be to no avail.

There are a few ways to treat gnat infestation. One, clean the environment where your mushrooms are growing. Gnats often live in the ground and settle in the trash. Remove any trash or refuse near the area. Sanitize the area well. Use yellow sticky paper to attract gnats and reduce infestation. Prevention is still the best treatment so make sure to clean your growing area regularly.

Harvesting problems

Growing mushrooms could be a challenge but you may end up spoiling all the time and effort you rendered on your mushroom garden if you don’t know when to harvest your shrooms. Your mushrooms or fruits will look like white bumps before becoming pins. After just five to twelve days, these will be ready for harvest.

When these fruits are ready for picking, cut the mushrooms close to the cake to remove it. Do not wait very long or until these reach the end of their growth phase because mushrooms usually lose their potency as they mature.

Storage problems

Another common problem is using the right storage container. Psilocybin mushrooms can go bad in just a few weeks inside the refrigerator. If you want to use a batch you’ve just grown for microdosing then you must think about where to store them.
The most effective way to store mushrooms for a long period of time is drying. Drying magic mushrooms will keep them potent for about two to three years. This is for as long as the dried shrooms are kept in a cool, dry and dark place. When dried mushrooms are kept inside the freezer, you will be able to store these for an indefinite amount of time.

Problems with deciding on a mushroom species and strain

Some mushrooms are best for first-time growers or beginners while some are only for experienced growers. Understanding the different strains of mushrooms and the different growing conditions of each will help you care for your crops and eliminate any problems.

Just some of the best strains and species for novice growers include the Psilocybe cubensis, B+ and Golden Teacher strains. Some are also forgiving strains and can grow even in suboptimal and changing climates and conditions. Choose well before you decide on what species you want to grow.

Growing mushrooms at home will give you a yearlong supply of magic mushrooms. You also reduce the risk of misidentifying mushroom species. Identifying these growing problems and understanding how to treat and prevent these will help you become a smart and successful magic mushroom grower.